BD-Power 1045995-T4 Ported T4 Exhaust Manifold

BD Diesel

BD-Power T4 Ported Exhaust Manifold for 98.5-2015 Dodge Ram Cummins 5.9L & 6.7L

  • T4 Flange
  • 2 Pre-Drilled & Tapped 1/8" NPT Ports
  • Ported Design Allows For Optimum Flow
  • Heat Expansion Joints Prevent Cracking
  • This exhaust manifold is not for use on stock turbo applications. It will require the use of a T4 turbocharger.

Common Turbos with T4 or T6 mounts:

Borg Warner S300 / S400 / S500
Holset HX50 / HX55 / HX60 / HX82
Garrett GT40 / GT42 / GT45 / GT47 / GT55

The BD-Power Ported T6 Exhaust Manifold for your 98.5-14 Dodge 6.7L Cummins features a larger runner sizes for enhanced flow and a T6 flange to mount your aftermarket turbocharger. For maximum and increased flow this manifold is casted with ports and runners that match the inlet gasket within 0.03". It's built-in heat expansion joints prevent cracking and the heavy cast HiSi Ductile Iron retains heat energy and is coated with high temperature black. The center mounted turbo flange is angled at an optimum 20° rather than 40º and helps with mounting S400, S500 and other larger turbochargers.
  • Larger runner size helps enhance flow through the manifolds with no restriction throughout rpm
  • Cast ports and runners match inlet gasket within 0.03"
  • Center Mount can face down or up
  • Optimum 20° rather than 40° - helps mounting S400, S500 other larger turbochargers
  • Heavy cast HiSi Ductile Iron retains heat energy and coated with high temperature black
  • 2 drilled and tapped 1/8-NPT ports
  • Heat expansion joints prevents cracking
  • These manifolds are intended for the installation of competition turbos
  • Some modifications to vehicle/engine components will be necessary.
Wastegated Models

New T4, T6 Waste Gated 3 Piece 'Ported' Exhaust Manifold With Pulse Scavenging Flow Design.
High performance, high RPM 5.9L & 6.7L engines benefit from better cylinder exhaust evacuation to keep EGTs down.

The "Combustion Pulse" that assists flow remains constant with the W/G valve closed and improves turbo response. Machined for use with Turbo Smart 45mm Hyper Gate.

Block off plate and clamp provided.

Gate port area is 1.67 sq. in., 33% of T4, 12% of T6 inlet

Pre-drilled and tapped to 1/8" NPT for pyrometer probe installation

Precision cast and machined from Hi Ductile Iron with 20 degree turbo mounting flange

Finished with a Black high heat protective coating

Waste Gate Regulator Kit
Common Turbos with T4 or T6 mounts:
  • Borg Warner S300 / S400 / S500
  • Holset HX50 / HX55 / HX60 / HX82
  • Garrett GT40 / GT42 / GT45 / GT47 / GT55